THOMSON Speedtouch 580 Setup And User Manual page 61

E-DOC-CTC-20040123-0001 v3.0
To enable level 2 - WPA-PSK
Select the entry Security level 2 - WPA-PSK which allows you to pro-
1
ceed with the following window:
Define your passphrase.
2
The passphrase must consist of 8 to 64 ASCII characters.
Note
Select an encryption method.
3
TKIP is the encryption as specified in the WPA standard. It is
Note
designed to be implemented by a firmware upgrade on legacy
hardware. AES encryption offers stronger security, but is not
part of the WPA -although it will become part of the future
standard -WPA2.
Optionally, change the rekeying interval.
4
The security keys used by each associated station are periodically
Note
changed for greater security. The interval between key refresh
can be set to an integer number of seconds. If set to 0, the keys
are not refreshed.
Click Apply to apply the WPA-PSK settings.
5
The colour of the WLAN LED will change to green.
Note
Reconfigure your wireless client(s) to use the changed settings.
6
Click to save your changes to persistent memory.
7 Save all
5 SpeedTouch™ Web Interface
59