THOMSON Speedtouch 580 Setup And User Manual page 63

Wireless multi-user adsl gateway

Hide thumbs Also See for Speedtouch 580:

Table of Contents

E-DOC-CTC-20040123-0001 v3.0

To change the ACL Access mode, select the desired ACL Access mode from the

dropdownlist and click apply.

By default new clients with the correct wireless settings (Network Name and, if

required, Network key) are automatically allowed to associate to the Speed-

Touch™580. However, the associated stations are NOT automatically added to

the ACL. If needed you can manually add them.

If registration is enabled the following window is shown:

clicking the Register button triggers the SpeedTouch™ to unlock the ACL for a

time frame of one minute, after which the ACL is locked again. All the new wire-

less clients successfully attempting to connect to the SpeedTouch™ (having the

correct wireless settings (Network Name and, if required, Network key)) will be

added to the table as allowed station.

The SpeedTouch™ automatically saves your current configuration at

Note

the end of the registration phase.

5 SpeedTouch™ Web Interface

Table of Contents