THOMSON Speedtouch 580 Setup And User Manual page 16

2 SpeedTouch™ Local Networking Setup
14
The Windows Found New Hardware Wizard appears:
4
This wizard will guide you through the installation procedure of the USB drivers.
Click Next to continue.
The following window allows you to select locations where it should search for
5
drivers:
Insert the SpeedTouch™ Setup CD-ROM, make sure that the wizard looks for the
drivers on the CD-ROM drive and click Next to continue.
The wizard will notify that it found drivers for the device on the CD-ROM.
6
Click Next to continue.
The installation procedure continues with the installation of the USB drivers.
7
In the following windows you can follow the installation procedure. Click Next
8
whenever requested to continue the installation.
At the end of the procedure, the following window appears:
9
Click Finish to complete the installation.
As a result your USB connection is installed and ready for use.
10
E-DOC-CTC-20040123-0001 v3.0