Adjusting the Drawer Pull Placement
LEFT ALIGN
Left hole on
drawer pull
aligns to
left hole on
drawer.
CENTERED
Center hole
on drawer
pull aligns to
center hole
on drawer.
RIGHT ALIGN
Right hole
on drawer
pull aligns to
right hole on
drawer.
To install the drawer handles, align either the left, center, or right hole on the drawer pull to
the predrilled left, center, or right hole on the file cabinet drawer. Secure the drawer pull with 3
wood screws and a Phillips head screwdriver. Repeat for the second drawer.
Installing, Adjusting, and Removing File Hangers
1
To install the file rails, simply place them on the side tracks of the bottom drawer. To reposition
or remove the file rails, press along the bottom of the side track near the file rail to release the
locking tooth, then slide the rail into the desired position or lift the rail off the tracks to remove.
2
LEGAL
Legal files will hang front-to-back from the file rails. Most other files, including letter files, will
hang side-to-side from the tracks; the rails can be used to separate files from each other or
other contents of the drawer.
LETTER
Need help?
Do you have a question about the Executive File Cabinet 401653 and is the answer not in the manual?