Personal Security - Raider RD-ESH02 User Manual

18 www.raider.bg
defective covers and other parts to determine whether the parts can continue to fulfill their obligations.
Check the setting of moving parts and their mobility, concentrate on cracks and broken parts, fixings
and other circumstances that could endanger their duties. The protective covering or other part that is
damaged must be repaired or replaced by an accredited workshop. The faulty switch must be changed to
an accredited service center.
5.12. Do not use this machine if it is impossible to switch it on / off from the switch.
5.13. Do not use this machine if the power cord is damaged.
This electrical device is designed in accordance with all applicable safety rules applicable to it. All
repairs must only be carried out by qualified personnel and only original spare parts may be used. This
can cause serious danger to the user in another case.
5.14. Turn off the power (gently pulling the plug from the socket):
• Whenever the machine is unattended
• Before removing the branches that blocked the machine
• Before inspecting, cleaning or operating the machine
• Whenever the machine vibrates unreasonably.
• During transportation

6. PERSONAL SECURITY

6.1. Children should be supervised to ensure that they do not play with the machine.
6.2. Be alert, watch what you do, and use common sense when using this machine.
6.3. Do not use this machine while tired, ill, or under the influence of drugs, alcohol, or medication, or
during pregnancy. A minute of inattention can lead to loss of control and can lead to serious injury.
6.4. Strive for a stable posture and balance at all times. This allows for better control of the instrument
in unexpected situations.
6.5. Remove any tools before turning on the machine. A wrench or wrench left attached to the rotating
part of the machine can cause personal injury.
6.6. Use safety equipment. Always wear safety goggles. Safety equipment such as a dust mask, non-
slip safety shoes, hard hat, or hearing protection used under appropriate conditions will reduce injuries.
6.7. Dress properly. Do not wear loose clothing or hanging jewelry. Keep your hair, clothes, and gloves
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
6.8. Prolonged use of the machine can lead to abnormal circulatory disorders in the hands caused
by vibrations. These effects can be exacerbated at low ambient temperatures and / or by tightening the
handles too tightly. Use may be extended with appropriate gloves or regular breaks. Make frequent work
breaks.
7. PROTECTION OF THE PERSON
Be prepared! It's a good idea to have at least one of the following:
7.1. Suitable extinguisher (CO
7.2. Fully equipped first aid kit easily accessible to the operator of the machine and the person
accompanying it. It should contain enough dressings for torn/cut wounds.
7.3. Mobile phone or other speed dial device. Do not work alone. It is good to have another person
around you who knows first aid principles.
The accompanying person must be at a safe distance from your workplace, but must be able to see
you at all times! Only work in places where you can quickly call the rescue service!
7.4. In the event of injury, always follow first aid principles.
7.5. If cut, cover the wound with a clean cloth and press firmly to stop the bleeding.
7.6. People with poor circulation who are exposed to excessive vibration can damage the blood vessels
or the nervous system. Vibration can cause the following symptoms in the fingers, hands or wrists:
or dry powder).
2