Note!
This product is intended to be supplied by an UL Listed power supply
suitable for use at Tma 50 degree C min., altitude operation up to
5000m, whose output meets PS2(or LPS), ES1(or SELV) and output is
rated: 12Vdc, 3A min. or 24Vdc, 1.5A for Models
FPM-212yxxxxxxxxxxxxxxx, FPM-215yxxxxxxxxxxxxxxx,
FPM-217yxxxxxxxxxxxxxxx, FPM212yxxxxxxxxxxxxxxx,
FPM215yxxxxxxxxxxxxxxx, FPM217yxxxxxxxxxxxxxxx;
24Vdc, 1.5A for Models
FPM-219yxxxxxxxxxxxxxxx, FPM219yxxxxxxxxxxxxxxx,
if need further assistance, please contact Advantech for further informa-
tion.
Warning! If the customer user DC power by oneself for this product may cause the
radio interference in which case, the customer must be to take adequate
measures.
Warning! If the customer needs to use power adapter, please use the power
adapter listed on the product datasheet. If the customer use the power
adapter not listed on the product datasheet, it may cause the radio
interference in which case, the customer must be to take adequate
measures
Warning! Avoid exposing FPM-200 to direct sunlight for long periods of time.
Direct sunlight falling onto a LCD screen can cause it to become very
hot and physically damage the LCD as the components are not
designed to tolerate high heat, shortening the life of the LCD.
Warning! The wire of the protective bonding conductor shall be green-and-yellow,
22 AWG / 0.3 (mm2) min.
FPM-200 Series User Manual
viii