Bunn Ultra NX Installation & Operating Manual page 14

Daily Operations
(continued)
SET DATE AND TIME
Selecting YES (Right Dot) allows the operator to set the DATE (YY MM DD) and TIME (HR MIN SEC) for
display on the HOME SCREEN.
I
SET DATE TIME ?
O
NO NEXT YES
Settings
SET NIGHT TIME / SET DAY TIME
The setting of the Day/Night mode allows the dispenser to "Power Down" during off hours. The bottom
corners displaying "ICE" will change to "CHILL" during the night mode. During the night mode, the product
will be kept chilled to below 38°F. "ICE" reading will return after night mode elapses. With "OFF" representing
12:00 AM, the operator can scroll to the times desired for the night time mode to begin and end.
I
SET NIGHT TIME
O
( - ) OFF (+)
INSTALL DATE
The following three screens will scroll after advancing past the function "Restore Defaults". The Install Date
and Time is recorded when the dispenser is powered on for the first 100 hours. The Install Date and Time
cannot be reset and is stored in permanent memory.
I
INSTALL DATE
O
NOTE: Several other menu functions are included in this dispenser. Please refer the PROGRAMMING
MANUAL available on the BUNN website at www.bunn.com.
SOFTWARE PROGRAMMING
I
AUG. 27 2021
O
(-) NEXT
I
SET DAY TIME
O
( - ) OFF
I
JAN. 25, 2019
O
3:55:25 PM
14
I
O
(+)
I
NIGHT TIME MODE
O
(+)
I
O
VERSION #__.__
10 : 45 : 00 AM
(-) NEXT (+)
CHILL CHILL
ULTRA