Bunn Ultra NX Installation & Operating Manual page 12

During normal operations, TIME, DATE, and SERIAL NUMBER toggle back and forth continuously.
The following function screens are in the order they appear from the menu display. Each screen will
have instructions and procedures to program the various functions of the dispenser.
Daily Operations
MENU FUNCTION INDEX
Press and hold the Center Dot for
five seconds to enter into the Menu
Function Index.
The following screens are in the order
that they appear from the Menu Display.
• Pressing NO (Left Dot) or NEXT
(Center Dot) will advance to the
next function.
• Press ON/OFF (I/O) will back up
to the Previous Screen. A one
minute time out will return to the
HOME SCREEN.
(BACK)
I/O Button
JAN. 25 2021
OFF OFF
Left
Center
Dot
Dot
(–)
(NEXT)
BEGIN
DAILY OPERATIONS
NO YES
PASSWORD
(–) NEXT
SETTINGS
NO YES
SOFTWARE PROGRAMMING
HOME SCREENS
Displays the TIME, DATE and other items if setup by toggling
back and forth continuously.
I
O
I
O
Right
Dot
(+)
Go to "Daily Operations"
Go to "Serial Number" if
held for 10 seconds.
Password screen will
0
only appear here if a
(+)
password is configured
on the machine.
If password is correct,
then advance to the
next screen.
Go to "Settings"
10:45:30 AM
off off
ULTR027930
off off
AUTO REFILL?
NO
ADVANCED SETTING
NO
SERVICE SETTINGS
NO
SERVICE TOOLS
NO
INSTALL DATE
NO
END
12
I
O
JAN. 25, 2021
off off
I
O
AN000001
off off
This screen will only
appear on machines
YES
equipped with an AUTO
REFILL circuit board.
Go to "Auto Fill"
YES
Go to "Advanced Settings"
YES
Go to "Service Settings"
YES
Go to "Service Tools"
Progressing on from
the "Install Date" will
YES
happen automatically
after the "Install Date"
is displayed briefly.
continued >