Operating Controls - Bunn Ultra NX Installation & Operating Manual

Hide thumbs Also See for Ultra NX:

Table of Contents

There are five of these switches that will be used for the operation of the dispenser.

1. Switch - Upper left corner of the control pad:

This switch is the ON/OFF toggle switch which powers up the dispenser and the LCD display.

When ON the Date and Time toggle back and forth continuously except during programming.

2. Bottom left corner:

This is used to turn the left side Auger Motor to AUGER ON, AUGER OFF or AUGER REFILL ON.

(Refill only applicable when installed)

3. Bottom left corner:

This is used to turn the left side ice control to OFF, ICE, CHILL or DEFROST.

4. Bottom right corner:

This is used to turn the right side Auger Motor AUGER ON, AUGER OFF or AUGER REFILL ON.

(Refill only applicable when installed)

5. Bottom right corner:

This is used to turn the right side ice control to OFF, ICE, CHILL or DEFROST.

6. Three Dots:

Where hidden buttons are located to use for Programming.

OPERATING CONTROLS

continued >

Table of Contents