Roland Jupiter-Xm Owner's Manual page 6

JUPITER-Xm Owner's Manual Ver. 1.5 and later
[PART] button
Chooses part select mode.
[MODEL BANK] button
Chooses sound select mode.
11 MODEL buttons
[1]–[16] buttons
Various functions are assigned to these buttons, depending on the
mode.
See the explanations of each mode for details.
12 Others
[MENU] button
Switches to the MENU screen.
[WRITE] button
Saves sounds and system settings.
[SHIFT] button
If you hold down this button and operate a knob, slider, or button,
the display shows the corresponding edit screen.
* By holding down the [SHIFT] button
controller, you can jump to the edit screen for that parameter.
[SCENE] button
Chooses scene select mode.
[FUNCTION] button
Chooses function mode.
Rear Panel
(Connecting Your Equipment)
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
E CTRL jack
F HOLD jack
Expression pedal (EV-5)
Pedal switch (DP series)
B C
D MIDI ports
Connect a MIDI device.
6
and operating a knob or other
G AUX IN jack
Connect an audio device.
or
H MIC
Electret microphone
Dynamic microphone
(mono)
13 Pitch bend/modulation
[PITCH] wheel
This varies the pitch. Moving the wheel toward yourself lowers
the pitch. Moving it away from yourself raises the pitch. When you
release your hand from the wheel, it returns to the center.
[MOD] wheel
This applies vibrato. When the wheel is all the way toward yourself,
no effect is applied. Moving the wheel away from yourself increases
the effect. The wheel does not move from its position when you
release your hand.
A PHONES jack
Connect stereo mini-type headphones here.
J OUTPUT (BALANCED) jacks
Mixer
I OUTPUT jacks
Monitor speaker
(Amplifier built-in)
K PHONES jack
Headphones
M
L USB port
USB flash drive Computer