Related Manuals for Dräger Medical GCX
Summary of Contents for Dräger Medical GCX
- Page 1 RETURN TO SERVICE PROCEDURE TABLE OF CONTENTS RETURN TO CD-ROM TABLE OF CONTENTS Field Service Procedure Part Number: SP00290 Rev: - Date: 25 September 2003 © 2003 Draeger Medical, Inc. GCX Pivot Rail Installation...
- Page 2 RETURN TO SERVICE PROCEDURE TABLE OF CONTENTS RETURN TO CD-ROM TABLE OF CONTENTS...
- Page 3 Parts Reference The following parts and hardware are included with this installation kit. (see illustrations for parts, hardware not shown): Item # Description Pivot Rail Assembly Figure 1. GCX Pivot Rail Assembly Tools required for this procedure: 3mm hex key (provided).
- Page 4 INSTALLATION PROCEDURE Mounting the Pivot Rail Assembly (left side) 1. Insert the Slide (1) in the GCX channel (with clamping screws at bottom) and move the Pivot Rail Assembly to the desired height. 2. Using the 3mm hex key (provided), tighten the two (2) clamping screws to secure the assembly in the channel.
- Page 5 INSTALLATION PROCEDURE Mounting the Pivot Rail Assembly (right side) 1. Insert the Slide (1) in the GCX channel (with clamping screws at bottom) and move the Pivot Rail Assembly to the desired height. 2. Using the 3mm hex key (provided), tighten the two (2) clamping screws to secure the assembly in the channel.
- Page 6 RETURN TO SERVICE PROCEDURE TABLE OF CONTENTS RETURN TO CD-ROM TABLE OF CONTENTS...
- Page 7 RETURN TO SERVICE PROCEDURE TABLE OF CONTENTS RETURN TO CD-ROM TABLE OF CONTENTS...
- Page 8 RETURN TO SERVICE PROCEDURE TABLE OF CONTENTS RETURN TO CD-ROM TABLE OF CONTENTS DrägerService is a division of Draeger Medical, Inc. 3122 Commerce Drive Telford, PA 18969 Tel: (215) 721-5402 (800) 543-5047 Fax:(215) 721-5784 Web: www.draegermedical.com Printed in the U.S.A.
Need help?
Do you have a question about the GCX and is the answer not in the manual?
Questions and answers