Peripheral Interface; Setup Window - POSIFLEX Aura PP7700 Series User Manual

Peripheral Interface

2.
The connector for peripheral control is a 6P6C RJ11 jack
with the following pin assignment. The best recommended cash
drawers to this connector are Posiflex CR3100, CR3200, CR4000
and CR4100. Using the cable 20863018001 (CCBLA-180-1)
delivered with the cash drawer, the Aura series can control one
dedicated cash drawer. However, by using an optional split cable
20867023800 (CCBLA-238), Aura series controls two cash
drawers through this connector. Please connect the CR1 plug to
the cash drawer (CRA) to be opened by command Esc p 1 n
and the CR2 plug to the cash drawer (CRB) to be opened by
command Esc p 0 n
6P6C RJ11 jack
PIN # Definition
1 FG
2 CRB
3 SENSE
4 VCC
5 CRA
6 SG

SETUP WINDOW

B.
On bottom cover of the Aura series thermal printer, there is
screwed a metal plate for setup window. In this window, there is a
8 position DIP switch for printer setup. Please use proper tool to
n .
1 2
6 1
Description
Frame ground
Drawer kick for cash drawer controlled by
software command Esc p 0 n
Input peripheral status
+ 24 V DC supply
Drawer kick for cash drawer controlled by
software command Esc p 1 n
Signal ground
5 - 2
6
1
6 pin plug
n
1 2
n
1 2
n
1 2