Advertisement

PP-7600
POS Printer
User Manual
Product Features
3" thermal printer with auto cutter
Printing speed up to 200 mm/sec
High-resolution printing up to 576 dots/line (W 8 dots/mm x H 8
dots/mm)
80 mm or 58 mm paper width support
Drop-and-load action for easy paper roll replacement
Control over 2 cash drawers through 1 D.K port
Optional kitchen bell function
Interface: USB (True USB & Virtual COM selectable) + serial, optional
LAN or WLAN (WiFi) interface module
High compatibility with Android, Linux, and Windows operating system,
allowing users to simply print a receipt via computer, tablet, or
smartphone
Easy wireless printing not only bringing along the mobility but also
increasing the productivity
Printing anytime and anywhere
Near end sensor
Optional LD-2000 light bar modular
19302900020 Ver. A0
http://www.posiflex.com
Package Contents
PP-7600 POS Printer..................(x1)
80mm-wide Thermal Paper...........(x1)
(For operational testing)
58mm Paper Spacer Plate.............(x1)
24V/60W Power Adapter.............(x1)
Power Cord..............................(x1)
USB Cable..............................(x1)
RS232 Cable (Optional)...............(x1)
Soft Wiping Cloth.....................(x1)
User Manual............................(x1)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PP-7600 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for POSIFLEX PP-7600

  • Page 1 PP-7600 POS Printer User Manual Package Contents  PP-7600 POS Printer………………(x1)  80mm-wide Thermal Paper………..(x1) (For operational testing)  58mm Paper Spacer Plate………….(x1)  24V/60W Power Adapter………….(x1)  Power Cord………………………...(x1)  USB Cable…………………………(x1)  RS232 Cable (Optional)…………...(x1)  Soft Wiping Cloth…………………(x1) ...
  • Page 2: Front View

    Views of the PP-7600 Front View Power Button Power LED Indicator Paper-out LED Indicator Error LED Indicator Feed Button Cover Open Lever Paper Cover Paper Roller Wedge Groove Paper Near End Sensor Paper Roll Exit Part Names Description Power Button This button turns the printer on or off.
  • Page 3: Rear View

    Part Names Description Wedge Groove A settled routine that makes the paper spacer plate hard to escape Paper Near End Sensor (Provided for adjusting the detection position to suit the diameter of the paper core used, and for adjusting the detection position of remaining amount of paper) Rear View Power Jack for LD-2000...
  • Page 4: Bottom View

    Cash drawer connector (RJ10) Fixing Screw Hole Formed for fixing the optional LD-2000 light bar for LD-2000 Wedge Groove Formed for fixing the optional LD-2000 light bar for LD-2000 I/O Ports of the PP-7600 Serial (RS232) Port USB Port (Type-B) D.K (RJ10) Port...
  • Page 5: Loading A Paper Roll

    Loading a Paper Roll Before loading a paper roll, make sure you use a specified paper type. Follow the steps below to load a paper roll. Press down the cover open lever to release the paper cover. The paper cover ejects. Then, open the paper cover manually.
  • Page 6 58mm width into the partition at the right side of the plate. Next, set the paper width by using the PP-7600 software switch utility. The software switch utility can be downloaded from the Posiflex’ global website: http://www.posiflex.com/en-global/Download/download.
  • Page 7 Pull the cover in the direction indicated by the arrow in the right figure. Remove the cable cover. Remove Connect power adapter to the printer power connector of the PP-7600.
  • Page 8 Connect I/O cable(s) to the I/O port(s) of the PP-7600. Connect to I/O ports Make the cable cover wedge to the printer. Determine that the cable cover is well wedged to the printer. Cover the I/O ports of the printer.
  • Page 9 Installing the LD-2000 Light Bar (Optional) Follow the steps below to install the LD-2000 light bar on the PP-7600 printer. Power off the printer when installing the LD-2000 light bar. Determine that the micro USB connector of the cable for LD-2000 to PP-7600 is securely connected to the micro USB port on the LD-2000 control board.
  • Page 10 Light Bar After installing the LD-2000 light bar, you can set up the LD-2000 by using the Posiflex LD2000 Tool. For more detailed information, refer to the Posiflex LD2000 Tool. To download the LD2000 Tool and its manual, go to the Posiflex’...
  • Page 11 Installing a Networking Module (Optional) Networking Module Slot It is easy to install a networking module in the PP-7600. Just refer to the following step-by-step instructions on installation of the module. Loosen and remove the screw from the I/O board bracket of the printer.
  • Page 12 2 screws by using a screwdriver. Installing the Posiflex LAN Wi-Fi Printer Manager (Optional) After you install the networking module in the PP-7600, to allow you to easily do settings of the LAN or Wi-Fi printer, please install the Posiflex LAN Wi-Fi Printer Manager.
  • Page 13: Status Led Indicators

    ON. Status LED Indicators After supplying power to the PP-7600 and powering ON the printer, you can read the system operation status from the power LED indicator on the printer. The LED status is described below.
  • Page 14: Troubleshooting

    After printing, the thermal head and its surroundings can be very hot. Be careful. Let it be cool before you clean it. Do not damage the thermal head with your fingers or any other hard object. Troubleshooting  The printer cannot print If you cannot print even though an error has not occurred, perform a self-test to check if printing is possible.
  • Page 15 Error LED indicator is flashing Power off the printer; after 10 seconds, power it back on. If the error LED indicator turns on again even after turning the power back on, malfunction may occurs. Contact your dealer or Posiflex’ technical service team.
  • Page 16: Specifications

    Specifications General Printer Reliability 100 Km print length Auto Cutter Reliability 700,000 cuts or more NV Bit Image Memory 12KB (max.) NV Graphics 384KB (max.) Receive Buffer Windows Printer Driver, OPOS, JavaPOS (Win), Printer Driver JavaPOS (Linux), Virtual COM Driver, CUPS Driver (Linux) Printer Uitlity (Android), Software Switch Utility Software...
  • Page 17 WEP, WPA, WPA2-Personal/Enterprise Operating System OS support Android / Windows / Linux ※ The product information and specifications are subject to change without prior notice. To get the detailed information on PP-7600, please check this model from Posiflex Global Website (http://www.posiflex.com/en-global/Download/download).
  • Page 18 <MEMO>...
  • Page 19 <MEMO>...
  • Page 20 <MEMO>...

Table of Contents

Save PDF