1.1.5
Front Panel Connections and Controls
1.1.5.1
With a Bezel
Table 1-7.
Front Panel Controls
Control
Power Button
ID Button
Fault LED
DGX A100 System
Description
Press to turn the DGX A100 system On or Off
Green flashing (1 Hz): Standby (BMC booted) Green
flashing (4 Hz): POST in progress Green solid On:
Power On
Press to cause the button blue LED to turn On
or blink (configurable through the BMC) as an
identifier during servicing.
Also causes an LED on the back of the unit to flash as
an identifier during servicing.
Amber On: System or component faulted
Introduction
DU-09821-001_v06 | 7