Using The Locking Power Cords; Locking/Unlocking The Pdu Side; Locking/Unlocking The Psu Side (Cords With Switch-Lock Mechanism) - Nvidia DGX A100 User Manual

1.1.3.3

Using the Locking Power Cords

Follow these instructions for using the locking power cords.
1.1.3.3.1

Locking/Unlocking the PDU Side

Power Distribution Unit side
To INSERT, push the cable into the PDU socket.

To REMOVE, press the clips together and pull the cord out of the socket.

1.1.3.3.2 Locking/Unlocking the PSU Side (Cords with Switch-Lock
Mechanism)
Power Supply (System) side - Switch locking
To INSERT or REMOVE make sure the cable is UNLOCKED and push/ pull into/out of the

socket
To LOCK the power cord, move the
switch to the locked position
(indicator should show only RED)
DGX A100 System
To UNLOCK the power cord, move
the switch to the unlocked position
(indicator will show GREEN)
Introduction
DU-09821-001_v06 | 5