You can check the status of the RAID 1 rebuild process using sudo nvsm show volumes,
and then inspecting the output under /systems/localhost/storage/
volumes/md0/rebuild.
3.2.1
Obtain Software Updates
Update the software to ensure you are running the latest version.
Updating the software ensures your DGX A100 system contains important updates, including
security updates. The Ubuntu Security Notice site (https://usn.ubuntu.com/) lists known
Common Vulnerabilities and Exposures (CVEs), including those that can be resolved by
updating the DGX OS software.
Run the package manager.
1.
$ sudo apt update
Upgrade to the latest version.
2.
$ sudo apt full-upgrade
3.2.2
Enabling the srp_daemon
The srp_daemon comes with the Mellanox drivers and is disabled by default. It is needed only
if you are using RDMA over Infiniband (see
enable the srp_daemon by issuing the following:
$ sudo systemctl enable srp_daemon.service
$ sudo systemctl enable srptools.service
DGX A100 System
SRP - SCSI RDMA
Protocol). If necessary, you can
First Boot Setup
DU-09821-001_v06 | 22