1.2.2
Supported Network Cables and Adaptors
The DGX A100 system is not shipped with network cables or adaptors. You will need to
purchase supported cables or adaptors for your network.
The ConnectX-6 firmware determines which cables and adaptors are supported. For a list of
cables and adaptors compatible with the Mellanox ConnectX-6 VPI cards installed in the DGX
A100 system.
1. Visit the Mellanox Firmware Release page.
2. From the left navigation menu, select the ConnectX model and corresponding firmware
included in the DGX A100.
3. Select Firmware Compatible Products.
1.3
DGX A100 System Topology
1.4
DGX OS Software
The DGX A100 system comes pre-installed with a DGX software stack incorporating the
following:
An Ubuntu server distribution with supporting packages
The following system management and monitoring software
NVIDIA System Management (NVSM)
•
Provides active health monitoring and system alerts for NVIDIA DGX nodes in a data
•
center. It also provides simple commands for checking the health of the
DGX A100 System
Introduction
DU-09821-001_v06 | 12