D-Link DPN-101G User Manual page 45

Section 3 - Configuration
Choose Admin > TR-069, the page shown in the following figure appears. This page is used to configure the TR-069 CPE. Here you may change the
setting for the ACS's parameters.
The following table describes the parameters of this page:
Field
ACS
The URL of the auto-configuration server to
URL
connect to.
User Name The user name for logging in to the ACS.
Password The password for logging in to the ACS.
Select Enabled to periodically connect to
Periodic Inform the ACS to check whether the configuration
updates.
Periodic Inform Specify the amount of time between
Interval connections to ACS.
Connection Request
The connection usrname provided by TR-069
User Name
service.
The connection password provided by TR-069
Password
service.
Specify the path to provide access to ACS. It's
Path
better to remain the current value.
Port Specify the tcp port to provide access to ACS.
D-Link DPN-101G User Manual
TR-069
Description
41