Section 3 - Configuration
Choose Admin > Backup/Restore, the page shown in the following figure appears. Once the router is configured you can save the configuration
settings to a configuration file on your hard drive. You also have the option to load configuration settings.
The following table describes the parameters of this page:
Field
Backup Settings to
Click it, and select the path. Then you can save
File
the configuration file of the ONU.
Restore Settings
Click Browse to select the configuration file.
from File
After selecting the configuration file of the
Restore
router, click Restore to start uploading the
configuration file of the ONU.
Reset
Restore the default settings of the ONU.
D-Link DPN-101G User Manual
Backup/Restore
Description
35