Table of Contents
Advertisement
Before You Begin
This installation guide provides instructions for
installing the DBA-X2830P on your network.
Additional documentation is also available on the
D-Link support website.
•
D-Link Nuclias Access Point Portal Manual: For
additional information and instructions on how
to configure the device using the D-Link Nuclias
cloud.
•
DBA-X2830P User Manual: For additional
information and instructions on how to configure
the device using the web user interface.
Package Contents
This DBA-X2830P package should include the
following items:
•
1 x DBA-X2830P
•
1 x Power adapter (optional)*
•
1 x Mounting kit
•
1 x Console cable
If any of the above items are damaged or missing,
please contact your local D-Link reseller.
*If the power adapter is not included, it can be
purchased separately. Please contact your local
D-Link reseller.
Setup Preparation
Please ensure that the following items are readily
available before continuing the installation process:
•
An active D-Link Nuclias account.
•
An active Internet connection to connect to the
D-Link Nuclias cloud.
•
A valid device license. Contact your D-Link Nuclias
service provider for more information.
System Requirements
•
A PC or laptop with a working Ethernet adapter
or wireless interface.
•
Mozilla Firefox 52.0 or higher, Internet Explorer
11 or higher, Safari 10.1 or higher, Google
Chrome 59 or higher.
2
•
OS X 10.8.5, Windows 7, Linux (Ubuntu 12) and
higher.
Hardware Overview
LED Indicators
2.4GH
5GH
Z
Z
1 2 3 4 5
Figure 1: Front Panel LED
#
LED
Status
Off
The 2.4 GHz wireless band is
disabled.
Solid
The 2.4 GHz wireless band is active.
1
2.4 GHz
green
Blinking
Data is being transmitted over the
green
2.4 GHz band.
Off
The 5 GHz wireless band is disabled.
Solid
The 5 GHz wireless band is active.
2
5 GHz
green
Blinking
Data is being transmitted over the
green
5 GHz band.
Off
No link detected on the port.
Solid
An active link is detected on the
LAN 1
3
green
port.
(PoE)
Blinking
Data is being transmitted on the
green
port.
Off
No link detected on the port.
Solid
An active link is detected on the
4
LAN 2
green
port.
Blinking
Data is being transmitted on the
green
port.
Solid
The DBA-X2830P is booting up.
orange
Blinking
The DBA-X2830P is resetting to its
orange
default settings or is upgrading its
firmware.
PWR/
5
Blinking
The DBA-X2830P is connecting to
Cloud
green
the D-Link Nuclias cloud.
Solid
The DBA-X2830P is in cloud mode.
green
Solid
The DBA-X2830P is not working
red
properly in cloud mode.
Table 1: LED Description
LAN1
LAN2
PWR/Cloud
Description
Advertisement
Table of Contents
