Pre-Wire - Ac(110V) 485 - Screen Innovations Solo 2 Installation Instructions Manual

PRE-WIRE - AC(110v) 485

1. Run Cat5e cable to the left side of screen cassette
installation location (refer to pg. 9).
2. Terminate the wires with the provided pinout as
shown below or use the incl. coupler to extend the
cable upto 200'.
Service Loop
Note: Red Service loop, can be cut to disable the DC
output from an AC 485 motor.
Pre-Wire - AC(110v) RTS
Pin 1
RS485 (+) - White
RS485 (-) - Orange
-
Power 7v DC - Red
-
-
-
Ground - Brown Pin 8
5