Reset To Factory Default; Pots Mode (Safe Mode) - Planet Networking & Communication VIP-155PT User Manual

ping
tracert
show basic
show ip route
show ip arp
show ip netstat
telnet

Reset to factory default

#setdefault clear IP phone settings expect network part
#setdefault all clear all settings.

POTS Mode (Safe mode)

VIP-155PT provide safe mode. When there is booting problem because of setting problem or firmware
problem. User can restore the factory setting or upgrade to a new firmware to solve this problem.
How to enter safe mode?
There will be a schedule bar in the VIP-155PT booting procedure, press # key within the first 5 seconds,
then the phone will go to POST mode. It has a default ip 192.168.10.1 in POST mode. User may
change the PC's IP address to 192.168.10.xx and telnet to 192.168.10.1 to access the VIP-155PT in
POST mode.
User can accord the guide in post mode to clear the settings or upgrade the firmware.
Check if the destination is accessible
Show network path info
Show network settings
Show route table
Show arp table
Netstat programe
Telnet to another device
#ping www.google.com
#tracert www.google.com
#show basic
#show ip route
#show ip arp
#show ip netstat
#telnet 192.168.1.2
55