Table of Contents
Advertisement
Parameter Description
Bridge Mode
IP address
Subnet Mask
DHCP Service
NAT
Hint
After confirming the modification you've done, Please click on the Apply button to macke the changes
effective, browse to "Config Manager" --> "Save Config" configuration menu and click "Save" button
to save configuration.
Then browse to "System Manage" --> "Reboot" configuration menu and click "Reboot" button to save
configuration.
WAN IP address configuration via web configuration interface
Execute your web browser, and insert the IP address (default: 172.16.0.1) of VIP in the adddress bar.
After logging on machine with username/password (default: root / null), browse to "Network" --> "WAN
Config" configuration menu, you will see the configuration screen below:
Enable this option to switch to bridge mode. VIP-155PT
won't assign IP for its LAN port in bridge mode and its LAN
and WAN port will be in the same network.
LAN IP address of VIP-155PT
Default: 192.168.0.1
LAN IP address of VIP-155PT
Default: 255.255.255.0
Enable DHCP service in LAN port
Enable NAT function. If Bridge mode is enable, this
function will be disabled.
It is suggested to keep the DHCP server related parameters
in default state to keep machine in best performance.
13
Advertisement
Table of Contents
