Table of Contents
Advertisement
Inside IP
Inside Port
Outside Port
Click
Add
to add new port mapping item and
Net Service
Field
HTTP Port
Telnet Port
RTP Initial Port
RTP Port Quantity
Notice: Settings in this page won't take effect unless save and reboot the device.
If you need to change telnet port or HTTP port, please use the port greater than 1024, because
ports under 1024 is system remain ports.
HTTP service if HTTP is set to 0.
Firewall settings
LAN device IP for port mapping
LAN device port for port mapping
WAN port for port mapping
Delete
Description
Configure HTTP transfer port, default is 80.User may change this
port to enhance system's security. When this port is changed,
please use
http://xxx.xxx.xxx.xxx:xxxx/ to reconnect.
Configure telnet transfer port, default is 23
RTP initial port
Maximum RTP port quantity, default is 200
to delete current port mapping item.
22
Advertisement
Table of Contents
