Example:<config-nat>#tcp-entry –ip 192.168.1.5 –lanport 1720 –wanport 1000
Delete TCP mapping rule
Example:<config-nat>#no tcp-entry –ip 192.168.1.5 –lanport 5060 –wanport 1000
Add UDP mapping rule
Delete UDP mapping rule
Show NAT info
Netservice
path: <config-netservice>#
Set DNS address
Example:<config-netservice>#dns –ip 202.112.10.36 _domain voip.com
Set alternate DNS address
Set hostname
Set http access port
Show http access setting
Set telnet access port
Show telnet access port
Set RTP initial port and quantity
Example:<config-netservice>#media-port –startport 10000 –number 200
Add route rule
Example:Arcihfone<config-netservice>#route –gateway 202.112.10.1 –addr 202.112.210.1 –mask
255.255.255.0
Delete route rule
Show route info
Show netservice info
Dial-peer settings
path: <config-pbook>#
[disable]enable calling through GK and proxy
Add number-IP bond entry
Example:<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip
Add number-IP bond and add prefix to the dial number
---no entry –ip x.x.x.x –lanport xxx –wanport xxx
---udp-entry –ip x.x.x.x –lanport xxx –wanport xxx
---no udp-entry –ip x.x.x.x –lanport xxx –wanport xxx
---show
---dns -ip x.x.x.x _domain xxx
---alterdns -ip x.x.x.x _domain xxx
---hostname xxx
---http-port xxx
---http-port
---telnet-port xxx
---telnet-port
---media-port –startport xxx –number xxxx
---route –gateway x.x.x.x –addr x.x.x.x –mask x.x.x.x
---no route –gateway x.x.x.x –addr x.x.x.x –mask x.x.x.x
---route
---show
---[no]enableGKandProxy
---entry –number xxx –ip x.x.x.x –protocol xxx
46
Need help?
Do you have a question about the VIP-155PT and is the answer not in the manual?