Planet Networking & Communication VIP-155PT User Manual page 47

---entry –number xxx –ip x.x.x.x –protocol xxx _add xxx
Example:<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip _add 123(dial 100 and
will send 123100 according this rule)
Add number-IP bond and replace the destination with another number
---entry –number xxx –ip x.x.x.x –protocol xxx _all xxx
Example:<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip _all 123( user dial 100
and gateway will sent 100 instead)
Add number-IP bond and delete the prefix of the destination number
---entry –number xxx –ip x.x.x.x –protocol xxx _del xxx
Example:<config-pbook>#entry –number 1234 –ip 202.112.20.100 –protocol sip _del 2 (dial 1234 will
send 34 instead)
Add number-IP bond and replace the prefix with another number
---entry –number xxx –ip x.x.x.x –protocol xxx _rep xxx _length xxx
Example:<config-pbook>#entry –number 1234 –ip 202.112.20.100 –protocol sip _rep 567 _length
2(dial 1234 will send 56734)
Delete dial-peer entry
Show current dial-peer rules
Set default voip protocol
Port settings
path: <config-port># 或<config-port X>#
set accecp relay mode
set callerid mode
disable callerid
config call forward
Example:<config-port 0>#callforward –condition busy –number 100 –ip 202.112.10.100 -port
5060 –protocol sip
Disable call forward
[disable]enable call transfer
[disable]enable call waiting
---callforward –conditon xxx –number xxx –ip xxx –port xxx –protocol xxx
---no entry –number xxx
---show
---default-protocol xxx
---accept-relay xxx
---callerid xxx
---no callerid
---no callforward
---[no]calltransfer
---[no]callwaiting
47