Disable Command; Reboot Command; Set Command - Planet WGD-800 User Manual

copy config flash

3.5.2.3 Disable command

Disable command is to exit the privileged mode and back to the first level of command line interface.
Command
Disable

3.5.2.4 Reboot command

Reboot command is to reboot the switch, please beware to check if the configuration is saved..
Command
Reboot

3.5.2.5 Set command

Set command is to change the parameter of the switch functions. The follow table lists the set commands and the
equivalent usages.
Command
set channel
set default
set dot1x auth mode
set dot1x auth-ctrl disable
set dot1x auth-ctrl enable
set dot1x local-userInfo
set dot1x max-req
set dot1x quiet-period
set dot1x reauth-max
set dot1x reauth-mode
set dot1x reauth-period
set dot1x servertimeout
set dot1x supptimeout
set dot1x tx-period
set enable password
set igmp-snooping disable
set igmp-snooping enable
set igmp-snooping forward-all-leave
Copy system configuration parameters to flash
Description
Disable privileged mode
Description
Reboot system
Description
Set ports to be channel
Set system load default parameters
Set dot1x auth mode
Disable dot1x
Enable dot1x
Set dot1x local user information
Max times of re-transmit EAP request to Supplicant
Quiet-period in secondst
Max times of re-transmit Request/ID before port become
Unauthorized
Enable or Disable reauthentication
Period for automatic re-authentication
Authentication server timeout
Timeout for supplicant
Set dot1x server timeout
Set the password for the privileged level of the CLI
Disable igmp snooping
Enable igmp snooping
Disable/Enable forward all-leave when fastleave is
disabled