Table of Contents
Advertisement
Contact: The contact person of the switch which would show in the SNMP software.
。
Fill the fileds and click on the "OK" button to save.
3. Community Configuration
Use this table to configure the SNMP community strings and define the policy of the relative string. The community
string acts like a password to permit access to the agent on the Switch. One or more of the following
characteristics can be associated with the community string:
Add Community: enter private or public
。
Chooses community strings for the Switch management access: read only or read/write
。
Read only: Enables requests accompanied by this string to display MIB-object information.
Read/Write: Enables requests accompanied by this string to display MIB-object information and to set MIB
objects.
Complete the above steps and click on the "Add" button.
The added string then shows in the Current Communities field.
Current Communities: show the list in input field
4. Management Station Configuration
Advertisement
Table of Contents
