Planet WGD-800 User Manual page 48

。
Port Mode
Access
Always Untag
Trunk
Port VID (PVID)
Set the port VLAN ID that will be assigned to untagged traffic on a given port. This feature is useful for
accommodating devices that you want to participate in the VLAN but that don't support tagging. The Switch allows
each port to set one PVID, the range is 1~255, default PVID is 1. The PVID must be the same as the VLAN ID that
the port was defined as belonging to in the VLAN group, or the untagged traffic will be dropped.
1. Select 802.1Q VLAN in the VLAN Type field and click on the "OK" button.
The main page then changes to the 802.1Q VLAN table which displays the VLAN configuration of each port.
2. If you want to configure port #2 to be in a VLAN other than default VLAN. Double click on "port2" to enter into
VLAN port configuration window.
VLAN Membership
Belongs to a single untagged VLAN
Allowed to belongs to multiple untagged
VLANs at the same time
Allowed to belongs to multiple Tagged
VLANs at the same time
Frame Leave
Untagged
( Tag=PVID be removed)
Untagged
(Tag=PVID be removed)
Tagged
(Tag=PVID or Original VID be remained)