Printing The Balancing Report - Fluke VIBXPERT II Operating Instructions Manual

Printing the balancing report

Two different report types are available for documentation:
- Screenshot: Printout of the current screen
- Report printouts: Detailed report printout with general measure-
ment data and balancing-related data.
A report printout can be started from the measurement or data screen:
Screenshot
• Press the MENU button and click on 'Print > Screenshot'.
• Select the printer, press the MENU button and click on 'Print'.
Report printouts
• Press the MENU button and click on 'Print > 'Report printouts'.
• Select the printer.
• Select the report configuration in the 'Reports' menu, or create a
new report configuration (see VIBXPERT II manual, page 4-21).
General report information can be entered in the 'Common settings'
tab.
The balancing-related report content is found on the 'Measure Info'
tab:
p : The balancing report contains a polar plot showing the
olar plot
completed balancing steps.
s : The balancing report contains all balancing steps ('de-
tep list Detail
tailed') or only the first and last steps ('short').
b / i
alance quality MproVeMent
ance quality (setpoint and actual value) if balancing was performed
with the machine setup. If a machine setup was not used, the im-
provement in the vibration values is shown in percent.
• Press the MENU button and click on 'Print'.
Starting a report printout
: The balancing report contains the bal-
Balancing-related report content
Printing
Balancing report
2-25