Vestil SBM Series Manual

Table of Contents

SBM-Series Economy or Adjustable Spreader Beams
ECONOMY MODELS
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description of
it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can
also be contacted online at https://www.vestil.com/page-parts-request.php.
Electronic copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
manuals.php.
Signal Words...........................................................................................................................
Safety Instructions....................................................................................................................
SBM-10 Economy Beams Exploded View, Bill of
SBM-20 Economy Beams Exploded View, Bill of
SBM-40 Economy Beams Exploded View, Bill of
SMB-60 Economy Beams Exploded View, Bill of
SBM-25 Adjustable Beam Exploded View, Bill of Materials, &
SBM-40 Adjustable Beam Exploded View, Bill of Materials, &
SBM-80 Adjustable Beam Exploded View, Bill of Materials, &
National Standards................................................................................................................
Record of Satisfactory Condition.............................................................................................
Load Tests.............................................................................................................................
Specifications........................................................................................................................
Using an Economy Model Lifting
Using an Adjustable Model Lifting
Inspections & Maintenance.....................................................................................................
Labeling Diagram..........................................................................................................................
Limited Warranty....................................................................................................................
Table of Contents
Rev. 6/14/2024
Vestil Manufacturing Company
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
www.vestil.com
Table of Contents
Materials, & Specifications..................................
Materials, & Specifications..................................
Materials, & Specifications....................................
Materials, & Specifications....................................
Beam.......................................................................................
Beam....................................................................................
Copyright 2017 Vestil Manufacturing Co.
Fax: (260) 665-1339
info@vestil.com
ADJUSTABLE MODELS
https://www.vestil.com/page-
Specifications.................................
Specifications.................................
Specifications.................................
SBM MANUAL
Page
2
2
3
4
5
6
7
8
9
10
10
10
10
11
12
13
14
15
Page 1 of 15