Vestil SPB-P-72 Instruction Manual

Vestil SPB-P-72 Instruction Manual

Fork-mounted snow plow

Advertisement

Table of Contents
SPB-P-72 Fork-Mounted Snow Plow
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description
of it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Support:
For answers to questions not addressed in these instructions and to order replacement parts,
labels, and accessories, call our Technical Service and Parts Department at (260) 665-7586. The
department can also be contacted online at http://www.vestilmfg.com/parts_info.htm.
Signal
Words.....................................................................................................................................
Hazards............................................................................................................................................
Exploded View and Bill of
Installation.....................................................................................................................................4
Record of Normal
Condition.................................................................................................................
Inspections &
Maintenance...........................................................................................................................
Labeling
Diagram...............................................................................................................................
Limited
Warranty................................................................................................................................
Table of Contents
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Web:
www.vestilmfg.com
Instruction Manual
Table of Contents
Materials...........................................................................................................
Copyright 2019 Vestil Manufacturing Corp.
Rev. 2/27/2019
Vestil Manufacturing Corp.
Fax: (260) 665-1339
SPB-P-72 MANUAL
e-mail:
info@vestil.com
Page 1 of 7
2
2
3
-
5
6
6
6
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPB-P-72 and is the answer not in the manual?

Questions and answers

Summary of Contents for Vestil SPB-P-72

  • Page 1 Web: www.vestilmfg.com e-mail: info@vestil.com SPB-P-72 Fork-Mounted Snow Plow Instruction Manual Receiving instructions: After delivery, remove the packaging from the product. Inspect the product closely to determine whether it sustained damage during transport. If damage is discovered, record a complete description of it on the bill of lading.
  • Page 2 Hazards: Vestil strives to identify all hazards associated with the use of its products. However, material handling is dangerous and no manual can address every risk. The most effective means for preventing accidents is for the end-user to exercise common sense and sound judgment whenever using this product.
  • Page 3 ”-13 x 1 ” HHCS, ASTM 65127 Cotter pin, zinc-plated, ” x 2” 11209 A307, Gr. A, zinc-plated 14-612-001 Pin, lock, weldment 37030 ”-13 Nylon insert lock nut Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 3 of 7...
  • Page 4 Remove all four bolts (2 on each bolts (2 on each side) side) from the cross channel from the cross channel Fork pocket Cross Cross bar Side View Overhead View Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 4 of 7...
  • Page 5 Adjust the position of the nuts on the outer side of the lip (labeled “b”) to achieve the desired spring tension. Tighten the inside nuts (a) against the lip to complete the adjustment. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 5 of 7...
  • Page 6 (260) 665-7586 and asking for the Parts Department. A: label 287 B: label 218 C (back side of blade) C: label 208 C (top of mid-frame) Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 6 of 7...
  • Page 7 Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid. Definition of “original part”? An original part is a part used to make the product as shipped to the Warrantee.

Table of Contents