Loading The Media - Toshiba B-FP3D-GH30-QM-R Owner's Manual

Loading the Media

1. Push the top cover open button to open the top
cover.
Top cover
CAUTION!
The print head has become hot immediately after
printing. Therefore, cool it down before loading
the media.
2. Move the paper guide lever toward the operation
panel and the paper guides outward.
NOTE:
Do not move the paper guides without unlocking
the paper guide lever. Doing this may break the
paper guides.
3. Place a media roll in the printer. Only outside
wound media can be used in the printer.
Paper
guide
NOTE:
Be careful when working with the tear bar. Its edge
is sharp.
Top cover
open button
Release
Paper guide
lever
4. Adjust the paper guides to the media roll width.
5. Push back the paper guide lever to lock the paper
guides.
Paper guide
6. Pull the top edge of the media toward the
operation panel, and close the top cover removing
slack of the media.
Top cover
NOTE:
•
Use Toshiba Tec approved media only. We are
not responsible for any print result due to the use
of other media.
•
When you order media, contact the nearest
Toshiba Tec representative.
7
Paper guide
lever
Lock
Media