Table of Contents
Advertisement
8. PRINTER CLEANING
8. PRINTER CLEANING
The printer should be cleaned regularly to retain high quality and optimum performance.
8.1 Print Head Cleaning
1.
Switch off and unplug the printer.
2.
Open the printer Top Cover.
3.
Remove the label media. (If loaded)
4.
Using a swab soaked in the dilute alcohol, wipe along the Print Head carefully.
5.
Do not close the Print Head until the alcohol volatilizing.
6.
Close the Top Cover.
8.2 Cover Cleaning
CAUTION!
Do not use harsh or abrasive cloth and solvent.
1.
Switch off and unplug the printer.
2.
Wipe the Cover with a dry soft cloth. Wipe off dirt with a soft cloth slightly moistened
with water.
8.3 Internal Parts Cleaning
1.
Switch off and unplug the printer.
2.
Open the printer Top Cover.
3.
Remove the label media (If loaded).
4.
Using a soft cloth soaked in the alcohol or mild detergent to wipe the internal parts,
such as Platen, sensor, etc.
5.
Remove the Rubber Roller by squeezing two sides of the Rubber Roller.
6.
Rubber Roller should be clean by cloth soaked in water.
7.
Install Rubber Roller and label media.
8.
Close the Top Cover.
8- 1
EO18-33013
8.1 Print Head Cleaning
Advertisement
Table of Contents
