Page 1
MAINFORCE 1240 12 x 40W led moving head zoom User Manual KEEP THIS MANUAL FOR FUTURE NEEDS 1 / 11...
Page 2
Unpacking Thank you for choosing Mainforce 1240. For your own safety, please read this manual before installing the device. This manual covers the important information on installation and applications. Please install and operate the fixture with following instructions. Meanwhile, please keep this manual well for future needs.
Page 3
Key Features 40W high power Leds installed. High efficient optical lens systerm. 8 - 60degree wide zoom range. Strong beam effect & Nice wash effect. Color: RGBW infinite mixture Dimmer: 0-100% linear dimming system Display: LCD color display with Chinese and English language.
Page 4
instructions under “Installation instructions”. Should you need any spare parts, please order genuine parts from your local dealer. Safety Instructions This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual.
Page 5
Mounting and Installation Cautions: For added protection mount the fixtures in areas outside walking paths, seating areas, or in areas where the fixture might be reached by unauthorized personnel. Before mounting the fixture to any surface, make sure that the installation area can hold a minimum point load of 10 times the device’s weight.
Page 6
For installations where the DMX cable has to run a long distance or is in an electrically noisy environment, such as in a discotheque, it is recommended to use a DMX terminator. This helps in preventing corruption of the digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3, which is then plugged into the output XLR socket of the last fixture in the chain.