General Safety Warnings For Laser - Titan TTB689CSW Safety And Operating Manual

k) Keep bystanders a safe distance away from work area. Anyone entering the work
area must wear personal protective equipment. Fragments of workpiece or of a broken
I) Hold the power tool by insulated gripping surfaces only, when performing an
operation where the cutting accessory may contact hidden wiring or its own cord.
m) Position the cord clear of the spinning accessory. If you lose control, the cord may
n) Never lay the power tool down until the accessory has come to a complete stop.
o) Do not run the power tool while carrying it at your side. Accidental contact with the
p) Regularly clean the power tool's air vents. The motor's fan will draw the dust inside
Sparks could ignite these
r) Do not use accessories that require liquid coolants. Using water or other liquid cool-

GENERAL SAFETY WARNINGS FOR LASER

CAUTION: LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Max. Power: < 1mW Wave Length: 650nm
EN 60825-1: 2007
a)
b) The laser shall be used and maintained in accordance with the manufacturer's instruc-
c)
d) -
e) -
f)
g)
7
MINI CIRCULAR SAW 500W TTB689CSW