Table of Contents
Advertisement
Quick Links
The ScanMaker 1000XL Plus is a tabloid-size scanner with a 12" x 16.9" scan bed,
3200 x 6400-dpi optical resolution, 4.2 maximum optical density, a Hi-Speed USB
interface, and one Smart-Touch button on the front panel for an easy access to the
scan function. With the use of the TMA 1600-III Transparent Media Adapter (available
as either standard or optional equipment), you can also scan film and transparencies -
including X-rays - up to 12" x 16" in size.
Contents
Getting to Know Your ScanMaker 1000XL Plus ...................................1
Features of the ScanMaker 1000XL Plus .............................................2
Taking a Closer Look ........................................................................3
Unlocking the Scanner ......................................................................4
How to Use the TMA 1600-III ............................................................5
A. Unpacking TMA 1600-III ........................................................5
B. Installing the TMA 1600-III .....................................................6
C. Unlocking the TMA 1600-III ....................................................7
Positioning Reflective Originals ...........................................................8
Positioning Transparent Film ............................................................10
A. Using the 35mm Slide Template ............................................11
B. Using the 35mm Filmstrip Template .......................................12
C. Using the 120 Film Template ................................................13
D. Using the 4" x 5" Film Template ...........................................14
E. Using the Film Alignment Ruler ..............................................15
Positioning Multiple Templates ..................................................16
Scanning Scenarios ........................................................................17
Copyright © 2021 Microtek International, Inc.
I49-005413 A, 0621
Getting to Know Your ScanMaker 1000XL Plus
https://www.microtek.com
For PC Users Using ScanWizard Pro ...........................................18
A. Scanning Photos ..........................................................18
B. Scanning Positive Film ...................................................22
C. Scanning Negative Film .................................................25
For Mac Users Using ScanPotter ...............................................28
Using the Microtek Scanner ICC Profiler (MSP) ...................................30
MSP and IT8 Calibration Data Installation ...................................30
Calibration Target ....................................................................30
Positioning the Target ..............................................................31
A. Positioning the Reflective Target ...................................31
B. Positioning the Transparent Target ..................................31
Calibration Setup .....................................................................32
Calibration and Profiling ............................................................33
Loading a Profile ......................................................................34
Specifications / System Requirements ...............................................35
FCC Compliance Statement .............................................................36
Advertisement
Table of Contents
Related Manuals for Microtek ScanMaker 1000XL Plus
Summary of Contents for Microtek ScanMaker 1000XL Plus
-
Page 1: Table Of Contents
Getting to Know Your ScanMaker 1000XL Plus The ScanMaker 1000XL Plus is a tabloid-size scanner with a 12" x 16.9" scan bed, 3200 x 6400-dpi optical resolution, 4.2 maximum optical density, a Hi-Speed USB interface, and one Smart-Touch button on the front panel for an easy access to the scan function. -
Page 2: Features Of The Scanmaker 1000Xl Plus
The ScanMaker 1000XL Plus comes with several important features, including the following: • Large 12" x 16.9" scan bed: The tabloid-size scan bed of the ScanMaker 1000XL Plus lets you easily scan oversized originals, contact sheets, large pieces of art, mechanical blueprints, and X-rays. -
Page 3: Taking A Closer Look
Scanner lid (or TMA 1600-III) Glass surface Vertical ruler Horizontal ruler READY indicator (Green) (U-shaped ruler) POWER indicator (Orange) Smart-Touch button (Scan) Accessory port (or with TMA 1600-III's connector securely Power switch connected) Hi-Speed USB port (1) Power connector ScanMaker 1000XL Plus User Guide... -
Page 4: Unlocking The Scanner
When the screw has been tightened, this indicates that your scanner is locked. 4. Turn off your scanner. The scanner is now ready for transport. ScanMaker 1000XL Plus User Guide... -
Page 5: How To Use The Tma 1600-Iii
How to Use the TMA 1600-III The Transparent Media Adapter (TMA 1600-III) is specially designed to scan slides, transparencies, and negative film with the ScanMaker 1000XL Plus scanner. The TMA 1600-III is available either as standard equipment or an optional accessory (depending on the scanner configuration that you purchased). -
Page 6: Installing The Tma 1600-Iii
2. Remove the scanner lid, then attach the TMA 1600-III by sliding the posts at the rear of the TMA 1600-III into the holes. Scanner lid TMA 1600-III 3. Plug the connector of the TMA 1600-III into the scanner’s 15-pin accessory port. ScanMaker 1000XL Plus User Guide... -
Page 7: Unlocking The Tma 1600-Iii
3. When the indicators on the front of your TMA 1600-III and scanner stop blinking, turn the locking knob clockwise to the lock position “ ”. 4. Turn off your scanner and disconnect the TMA 1600-III connector from the scanner. The TMA 1600-III is ready for transport. ScanMaker 1000XL Plus User Guide... -
Page 8: Positioning Reflective Originals
Black Plate is in optimal condition at all times. 2. A protective film covers the Black Plate during shipping and prevents it from being scratched. When peeling the film from the plate, be careful not to tear or bend the Black Plate. ScanMaker 1000XL Plus User Guide... - Page 9 B. To scan without TMA 1600-III, simply lift the scanner lid, and place the reflective original to be scanned on the scanner glass surface. Center the original along the U-shaped ruler on the scanner. ScanMaker 1000XL Plus User Guide...
-
Page 10: Positioning Transparent Film
Film Alignment Ruler is explained in the succeeding pages of the manual. 35mm Slide Template 35mm Filmstrip Template 120 Film Template 4" x 5" Film Template Film Alignment Ruler ScanMaker 1000XL Plus User Guide... -
Page 11: Using The 35Mm Slide Template
To scan 35mm slides, use the 35mm Slide Template, which can hold up to 4 mounted 35mm slides at a time. 1. Place the 35mm Slide Template on the scanner glass surface. Make sure to orient the template with the “Microtek” logo facing up. The Grabber is used to remove the Calibration strip... -
Page 12: Using The 35Mm Filmstrip Template
2. Place the 35mm Filmstrip Template containing the loaded filmstrip on the scanner glass surface. Make sure to orient the template with the “Microtek” logo facing up. The Grabber is used to remove the... -
Page 13: Using The 120 Film Template
3. Place the 120 Film Template containing the loaded film on the scanner glass surface. Make sure to orient the template with the “Microtek” logo facing up. Calibration strip The Grabber is used to remove the... -
Page 14: Using The 4" X 5" Film Template
"Microtek" logo facing up 2. Place the 4" x 5" Film Template containing the loaded film on the scanner glass surface. Make sure to orient the template with the “Microtek” logo facing up. The Grabber is used to remove the... -
Page 15: Using The Film Alignment Ruler
U-shaped ruler located at the front of the scanner. During placement of the film, make sure that the calibration strip on the scanner glass surface is kept clear and free of obstruction at all times. ScanMaker 1000XL Plus User Guide... -
Page 16: Positioning Multiple Templates
At least two sets of each template are included in your TMA 1600-III package for multiple placements of the templates on the scanner. The templates can be placed side by side on the scanner glass surface, as shown in the illustration below. ScanMaker 1000XL Plus User Guide... -
Page 17: Scanning Scenarios
35mm filmstrips, 6 x 17 cm (120) panoramic film, and 4" x 5" / 6 x 9 cm film. For Mac Users Using ScanPotter, • Scanning photos and film: This scenario details the steps for scanning photos and film. ScanMaker 1000XL Plus User Guide... -
Page 18: For Pc Users Using Scanwizard Pro
Calibration reminder window whenever it appears, and click the Skip button always. - Click the Calibrate button to run the Microtek Scanner ICC Profiler (MSP) program to perform color calibration and to customize the ICC profile for your scanner. After finishing with calibration, relaunch ScanWizard Pro. - Page 19 OK button to accept the settings. You can always change the settings at a later time. For more information, see the Color Matching Setup section in the ScanWizard Pro Reference Manual in the Microtek Software DVD. Pertains to how your monitor displays color,...
- Page 20 When you have completed the settings, press the Done/Save button, and the scanner will automatically scan and save your image based on your settings. ScanMaker 1000XL Plus User Guide...
- Page 21 ScanMaker 1000XL Plus User Guide...
-
Page 22: Scanning Positive Film
Calibration reminder window whenever it appears, and click the Skip button always. - Click the Calibrate button to run the Microtek Scanner ICC Profiler (MSP) program to perform color calibration and to customize the ICC profile for your scanner. After finishing with calibration, relaunch ScanWizard Pro. - Page 23 When you have completed the settings, press the Done/Save button, and the scanner will automatically scan and save your image based on your settings. ScanMaker 1000XL Plus User Guide...
- Page 24 The selected template scan job can then mode will crop the images and replace all have its own existing scan jobs automatically. settings. ScanMaker 1000XL Plus User Guide...
-
Page 25: Scanning Negative Film
For more details on how to control settings for negative film scanning, see the section “Negative Scan Settings Window” in the ScanWizard Pro Reference Manual in the Microtek Software D/DVD. ScanMaker 1000XL Plus User Guide... - Page 26 When you have completed the settings, press the Done/Save button, and the scanner will automatically scan and save your image based on your settings. ScanMaker 1000XL Plus User Guide...
- Page 27 ScanMaker 1000XL Plus User Guide...
-
Page 28: For Mac Users Using Scanpotter
Click the Scan button to start scanning. When done, the scanned image will be automatically saved into the folder you assigned. g) Click the Show in Finder button and then select the scanned image to view from the opened folder. ScanMaker 1000XL Plus User Guide... - Page 29 Preview window Scan frame (enclosed by dotted lines) ScanMaker 1000XL Plus User Guide...
-
Page 30: Using The Microtek Scanner Icc Profiler (Msp)
Using the Microtek Scanner ICC Profiler (MSP) NOTE: This chapter is only for the PC users who have installed the Microtek's MSP utility, and use the IT8 color targets to generate scanner ICC profiles. The Microtek Scanner ICC Profiler (MSP) is a scanner calibration and profiling utility program designed exclusively for Microtek scanners. -
Page 31: Positioning The Target
1. Load the target face down inside the slot of the 4" x 5" Film Template. 2. Place the 4" x 5" Film Template with the loaded target on the scanner glass surface, and orient the template with the “Microtek” logo facing up. Important: Align the... -
Page 32: Calibration Setup
Calibration Data to update the target profiles in your system. D. When all the settings are done, click the Start (or Start Profiling) button. The calibration window will appear, and an initial preview of the target is performed. ScanMaker 1000XL Plus User Guide... -
Page 33: Calibration And Profiling
L mark (“ ”). Align normal L mark (“ ”). Align the the cursor with the small bottom-right cursor with the small upper-right registration mark. registration mark. ScanMaker 1000XL Plus User Guide... -
Page 34: Loading A Profile
“Positive” or “Positive Film” option for transparencies and slides. 3. From the Settings window, click the Scanner Profile (or Input Profile) list box, and select the profile you have just created. ScanMaker 1000XL Plus User Guide... -
Page 35: Specifications / System Requirements
• Windows 7 / 8 / 10 • Intel-Based Mac computer with built-in USB port • macOS 10.15 or later Important Specifications, software bundles, and accessories are subject to change without notice. Not responsible for typographic errors. ScanMaker 1000XL Plus User Guide... -
Page 36: Fcc Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ScanMaker 1000XL Plus User Guide...
Need help?
Do you have a question about the ScanMaker 1000XL Plus and is the answer not in the manual?
Questions and answers