FLIR C Series User Manual page 2

5
Quick Start Guide
With suggestions from Cambridge Carbon Fottprint
5.1 Procedure
Follow this procedure:
1. Charge the battery for approximately 1.5 hours, using the FLIR power supply.
2. Push the On/off button
3. Aim the camera toward your target of interest.
4. Push the Save button to save an image.
See Below
(Optional steps)
5. Download FLIR Tools from http://support.flir.com/tools.
6. Install FLIR Tools on your computer.
7. Start FLIR Tools.
8. Connect the camera to your computer, using the USB cable.
9. Import the images into FLIR Tools.
10. Create a PDF report in FLIR Tools.
Connect Flir C2 to your PC via USB and switch on. When ON,
look for drive letter (eg D;) with Windows Explorer, etc.
Copy images from D:\DCIM\100_FLIR
Please delete your images from C2, when finished.
#T559918; r. AN/42281/42281; en-US
to turn on the camera.
11