Chapter 24: Removing The I/O Board; Prerequisites; Procedure - Dell Inspiron 5481 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

Remove the base cover.

Procedure

1. Peel off the tape that secures the I/O-board cable to the palm-rest and keyboard assembly.
2. Open the latch, and disconnect the I/O-board cable from the I/O board.
3. Remove the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly.
4. Lift the I/O board off the palm-rest and keyboard assembly.
Removing the I/O board
computer. After working inside your computer, follow the instructions in
24
After
www.dell.com/
Removing the I/O board 47