NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
3. Remove the
wireless
card.
4. Remove the
display
assembly.
5. Follow the procedure from step 1 to step 3 in
Procedure
1. Using a plastic scribe, pry up the camera module and turn it over.
2. Peel off the tape that secures the camera cable to the camera module and disconnect the camera cable from the camera
module.
3. Lift the camera module off the display panel.
64
Removing the camera
Removing the camera
computer. After working inside your computer, follow the instructions in
"Removing the display back-cover and antenna
36
After
www.dell.com/
assembly".