NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1. Align the screw holes on the display hinges with the screw holes on the display back-cover and antenna assembly.
2. Replace the two screws (M2x3) that secure the display hinges to the display back-cover and antenna assembly.
3. Replace the six screws (M2.5x2.5) that secure the display hinges to the display back-cover and antenna assembly.
4. Route the antenna cables through the routing guide on the display hinge and secure it in place.
Post-requisites
1. Follow the procedure from step 3 to step 5 in
2. Replace the
display
assembly.
3. Replace the
wireless
card.
4. Replace the battery.
5. Replace the
base
cover.
Replacing the display hinges
computer. After working inside your computer, follow the instructions in
"Replacing the display back-cover and antenna
www.dell.com/
assembly".
Replacing the display hinges
35
After
63