NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1. Slide the camera cable into the connector one the camera module and adhere the tape that secures the camera cable to the
camera module.
2. Using the alignment post, adhere the camera module on the display panel.
Post-requisites
1. Follow the procedure from step 3 to step 5 in
2. Replace the
display
assembly.
3. Replace the
wireless
card.
4. Replace the battery.
5. Replace the
base
cover.
Replacing the camera
computer. After working inside your computer, follow the instructions in
"Replacing the display back-cover and antenna
37
After
www.dell.com/
assembly".
Replacing the camera
65