Page 5
Insert wood dowels (E) into parts (4,5,8,9) dowels and dowels (F) into parts (13) 70mm Attach legs (3) to cross bar (4) using bolt (A) and hex key (J)
Page 7
70mm 40mm Secure part (8,9) to part (11,10) using screw (O)
Page 8
Step 07 50mm Attach legs (15) to frame parts (10,11) using screw (M) and Union Screw (N). Union Screw (N) should be on the inside of the bed frame, with screw (M) on the outside of the leg. Tighten by using with hex key (J) on both ends of the screw at the same time.
Page 9
Step 09 20mm Attach the metal connector plate (Q) to the 2 corners of the bed with screw (P) Step 10 40mm...
Page 11
Step 13 30mm Insert the Spindle (Part 1) underneath and use Screw (C) to connect to Part 6. Step 14 Spindle 30mm 20mm Attached three Screews (P) Attached Four Screews (B) Insert Headboard slat (14) on part (7), with 3 screw ( P), secure more 4 Screw (B) in Spindles (1)