Clearing Counts And Totals - CUMMINS ALLISON JetSort 1000 Series Operating Instructions Manual

SECTION 2 JETSORT 1000 Series OPERATION
8.

CLEARING COUNTS AND TOTALS:

JetSort tracks individual coin bag counts and day counts, independent of any Batch or
Sub-Batch data stored. These features allow you to obtain grand totals for individual
coin denominations and total coin sorted and counted for any period desired. Bag and
day counts accumulate until a bag limit is reached or counts are cleared manually by an
operator.
JetSort allows you to clear bags and day totals either when they have reached their
individual bag stop limits or at any time before they reach their limits. It also allows you
to clear all bags at once.
Example: To clear the Day Total, press the TOTALS key until the Day Total appears.
Press the CLEAR key and a similar screen should appear:
COIN $
CLEAR DAY TOTAL?
To clear the Day Total, press the CLEAR key again and the following screen should
appear:
COIN $
DAY
Press the END key to return to the main screen.
9. CLEARING BOX/BAG LIMITS:
When a bag or box has reached its stop limit, the JetSort 1000 stops and a limit
message flashes on the display, showing the denomination for which the limit has been
reached.
To clear the bag count or box count, press the CLEAR key once. The JetSort 1000 will
display the following screen:
Rev. D
25c 4000
LIMIT 25c
25c 0
CLEAR THIS BAG ?
Page 30
921.36
.00
TOTAL
Form # 022-7240-00