Clearing Counts And Totals - CUMMINS ALLISON JetSort 1000 series Operating Instructions Manual

To view a specific total by denomination, press the TOTALS key, then the DENOM key.
Example: To view the dime total for the Day, press the TOTALS key, scroll until the display states the Day
Total, press the DENOM key until the display shows the dime total.
A sample screen is shown below. JetSort has processed $216.70 in dimes, with a unit count of 2,167.
10c $
DAY
To exit out of TOTALS or DENOM, press the END key.
ID totals are displayed through the Day Total. To display totals for individual IDs, the JetSort must be in a
Batch Ended condition. Press the TOTALS key for the Day/ID screen as indicated below.
10c $
DAY ID: 13
Enter the ID number you wish to display and press the ENTER key. The ID number you entered will be
displayed on the Day/ID screen and ID totals will be displayed in the upper right hand corner of the screen.

Clearing counts and totals:

JetSort tracks individual coin bag counts and day counts, independent of any Batch or Sub-Batch data stored.
These features allow you to obtain grand totals for individual coin denominations and total coin sorted and
counted for any period desired. Bag and day counts accumulate until a bag limit is reached or counts are
cleared manually by an operator.
JetSort allows you to clear bags and day totals either when they have reached their individual bag stop limits
or at any time before they reach their limits. It also allows you to clear all bags at once.
Example: To clear the Day Total, press the TOTALS key until the Day Total appears.
Press the CLEAR key and a similar screen should appear:
COIN $
CLEAR DAY TOTAL?
CLEAR DAY ID:
13
To clear the Day Total, press the CLEAR key again and the following screen should appear:
COIN $
DAY
Press the END key to return to the main screen.
216.70
2167
216.70
2167
921.36
.00
TOTAL
Section 2: Operation | JetSort 1000 series | 17
®