Specifications - Echo DSRM-2600 Operator's Manual

External dimensions:
Length × Width × Height
Mass:
Unit without battery, cutting attachment and guard
Unit with battery, specified cutting attachment, guard and harness
Cutting attachment:
Nylon line cutting head (Cutting swath)
Thread
Nylon cord size (diameter)
Nylon cord length
Gear Case: Gear ratio and lubrication
Rotational direction of output shaft viewed from above
maximum rotational frequency of the spindle
Battery:
Type
Pack voltage
Charger type
Charger input voltage
Battery Charger Lights:
Charge Time:
Vibration levels: (EN50636-2-91)
Sound pressure level: (EN50636-2-91)
Sound power level: (EN50636-2-91)
Uncertainty
Guaranteed sound power level: (2000/14/EC, Annex VI)
These specifications are subject to change without notice.
The vibration and noise emissions during actual use of the unit can differ from the declared values depending on the ways in which
the tool is used especially what kind of workpiece is processed.

Specifications

L
1896 × 332 × 275 mm
3.2 kg
6.0 kg
SF400 (406)
Left-handed thread M10×1.25 pitch
2.4 mm
3.5 m
1.62 reduction and good quality lithium grease
Anticlockwise
-1
5700 min
Li-ion
56 Volts (rated 50.4 V)
CCCV
220 - 240 Volts AC
Red LED – Battery is outside charging temperature range
Red LED Blinking – Fault
Green LED – Battery finished charging
Green LED Blinking – Battery is charging normally
(with LCJQ-560)
LBP-560-100 battery: Approximately 33 minutes.
LBP-560-200 battery: Approximately 64 minutes.
LBP-50-150 battery: Approximately 47 minutes.
LBP-50-250 battery: Approximately 89 minutes.
Front handle 1.3 m/s
Rear handle 1.5 m/s
2
Uncertainty 1.5 m/s
78.5 dB(A)
92.6 dB(A)
3.0 dB(A)
96 dB(A)
27
Specifications
DSRM-2600
U
1896 × 669 × 593 mm
3.7 kg
6.9 kg
2
Left handle 2.1 m/s
2
Rigfht handle 1.4 m/s
Uncertainty 1.5 m/s
80.7 dB(A)
91.0 dB(A)
3.0 dB(A)
96 dB(A)
2
2
2