Specifications - Echo DTT-2100 Operator's Manual

Mass:
without battery
with LBP-50-250 battery
Cutting device:
Type
Blade length
Pitch
Height
Lubrication
External Dimensions: length × width × height
(with LBP-50-250 battery)
Battery:
Type
Pack voltage
Charger type
Charger input voltage
Battery Charger Lights:
Charge Time:
Sound Pressure Level: (EN IEC 62841-4-5)
Uncertainty
Sound Power Level: (EN IEC 62841-4-5)
Uncertainty
Vibration levels: (EN IEC 62841-4-5)
Front handle
Rear handle
Uncertainty
These specifications are subject to change without notice.
 The declared vibration total value has been measured in accordance with a standard test method and may be used for com-
paring one tool with another.
 The declared vibration total value may also be used in a preliminary assessment of exposure.

Specifications

DTT-2100
kg 3.7
kg 5.5
Dual action, double sided blade
mm 475
mm 30
mm 24
Lithium based grease (NLGI Grade 2)
mm 1632 × 475 × 293
Li-Ion (LBP-50-150/LBP-50-250)
V 56 (rated 50.4)
CCCV
V AC 220 - 240
Red LED – Battery is outside charging temperature
range
Red LED Blinking – Fault
Green LED – Battery finished charging
Green LED Blinking – Battery is charging normally
(with LCJQ-560)
LBP-50-150 battery: Approximately 47 minutes.
LBP-50-250 battery: Approximately 89 minutes.
(with LCJU-560)
LBP-50-150 battery: Approximately 47 minutes.
LBP-50-250 battery: Approximately 57 minutes.
dB(A) 86.3
dB(A) 3.0
dB(A) 96.8
dB(A) 1.2
m/s² 2.7
m/s² 0.9
m/s² 1.5
29
Specifications