REMOTE CONNECTION (REM):
Connect the amplifiers Remote (REM) terminal to the source unit Remote turn on lead using a minimum of
0.75mm2/18 gauge wire. If your source unit does not have a turn on connection, connect the amplifier (REM)
terminal through a power switch button which can provide a +12V signal.
Remote wire maximum accepted size for terminal:
SE550.2DF:
MAX 10 awg / 6mm2
SE225.4DF:
MAX 10 awg / 6mm2
FIG 1: POWER CONNECTIONS
NOTE! SE series amplifiers do not come with internal or external fusing.
Always make sure you install appropriate inline fusing on the positive power source side.
Recommended external fuse size:
SE550.2DF:
80A-100A
SE225.4DF:
80A
SE550.4DF:
SE2200.5DF: MAX 10 awg / 6mm2
SE550.4DF:
150A
SE2200.5DF: 150A
MAX 10 awg / 6mm2
+12V
REM
POWER INPUT
GND