Bass Habit Elite SE550.2DF User Manual page 14

FIG 4: FRONT PANEL
1
RCA signal input
2
High pass filter (HPF)
3 Low pass filter (LPF)
4
Gain
5
Bass boost level (LEVEL)
6
Subwoofer remote volume control input
7
Power status, Clipping & Protection LED
8
Speaker wire terminal
9
Crossover switch
1 2 3 4 5
Connect the RCA signal wire from the audio source / head unit
Adjust High pass filter crossover point (15Hz - 3/6KHz)
Adjust Low pass filter crossover point (50Hz - 6/20KHz)
Adjust the Gain level (0,2-5V)
Adjust the bass boost level between 0-12 dB (50Hz)
Input for connection of the bass remote control
Indicating the power & clipping status and activated protecion mode
Connect to one or several speakers/subwoofers
Adjust the crossover between the settings High pass, Low pass or Flat
6 7 8
9