Operating Instructions - Harvia Spectrum Mini Instructions For Installation And Use Manual

Full spectrum infrared cabin
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 21

OPERATING INSTRUCTIONS

EN
Operation precautions
Make sure external voltage fit product voltage allowance
Connect cable plug into external power outlet. Do not share the outlet with any
other appliances.
Initiate infrared heating system by touching the power key on the control panel
and shut down it by touching the same key. If you do not use the machine, please
unplug it.
You can enjoy our products after a short while of preheating. For a better
experience of enjoying our product, consuming one bottle of water before in
advance is recommended.
Do not use any bath products in the sauna.
Please wait a moment after the end of treatment until the temperature cools
down to avoid the discomfort caused by a rapid drop in temperature.
Maintenance
Before using
Please be sure to follow the instruction manual
Protect the wooden parts of the product by placing a towel on the seat.
After using
Unplug the power cable
Open the door to let the heat and humid water vapor dissipate and keep the sauna cabin dry.
Stain on wood
The outer cabin can be wiped with a wrung wet towel. The inner cabin can be cleaned with a vacuum cleaner.
Do not use organic solvents to decontaminate, such as gasoline, alcohol, etc. wipe the sauna surface.
Do not use sharp objects in sauna cabin to prevent scratching woods.
Stain on glass
Wipe the glass with soft paper
Stubborn stains can be wiped with a damp cloth, then dry with a dry cloth
Do not scratch the surface with a sharp object to prevent scratching the glass.
Control panel
1. Temperature display screen
2. Time display screen
3. USB
4. Light button
5. Power button
6. Temperature control
7. Time control
8. Audio function
9. Lock button
Operating Instructions
Power ON/OFF
Plug the power cord.
Push the power button to turn on or turn off the device.
Light
Push the light button to turn on or turn off the light.
Temperature
After heater is turned on, press TEMP- or TEMP+ to adjust the heater temperature.
Temperature range is from 30 to 65°C (75°C) / 90 to 150°F (167°F)
Stepping temperature is 1°C/ 5°F.
TEMP
When temperature is lower than 30°C / 90°F it shows LO.
Celsius / Fahrenheit: Press "TEPM-" and "LOCK" for 5 seconds to switch temperature unit.
• Do not lay anything in front of the door.
• Do not lay anything inflammable or chemical
substances near the product.
• Do not dry clothes or towel inside the product to avoid fire.
• Never pour water on the cabin or the electrical components to avoid electric
shock and any damage to the heaters.
• Please do not touch any metal surface on the cover of the heaters to avoid
burn.
• Do not clean the cabin or the electrical components with too much moisture.
1
2
3
4
5
EN
6
7
8
9
21
Operating Instructions

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sgs810

Table of Contents